Radiator Cooling Fan Motor: Service and Repair

REMOVAL
1. DRAIN ENGINE COOLANT
2. REMOVE AIR CLEANER INLET
3. REMOVE AIR CLEANER ASSEMBLY





4. REMOVE ELECTRIC COOLING FAN
a) Disconnect these parts:
- Upper radiator hose from radiator
- ECM outlet duct from ECM box
- Wire for electric cooling fan from clamp on electric cooling fan
- 2 electric cooling fan connectors
- Radiator reservoir hose from radiator
b) Remove the 6 bolts and electric cooling fan.

DISASSEMBLY





1. REMOVE FANS
Remove the nut and fan. Remove the 2 fans.





2. REMOVE FAN MOTORS
a) Disconnect the wires and connector holders from the fan shroud.
b) Remove the 3 screws and fan motor. Remove the 2 FAN MOTORS.

REASSEMBLY
1. INSTALL FAN MOTORS





a) Install the fan motor with the 3 screws. Install the 2 FAN MOTORS.





b) Install the wires and connector holders to the fan shroud as shown in the illustration.





2. INSTALL FANS
Install the fan with the nut. Install the 2 fans.

INSTALLATION





1. INSTALL ELECTRIC COOLING FAN
a) Install the electric cooling fan with the 6 bolts.
Torque: 5.0 Nm (50 kgf-cm, 44 inch lbs.)
b) Connect these parts:
- Upper radiator hose to radiator
- ECM outlet duct to ECM box
- Wire for electric cooling fan to clamp on electric cooling fan
- 2 electric cooling fan connectors
- Radiator reservoir hose to radiator
2. INSTALL AIR CLEANER ASSEMBLY
3. INSTALL AIR CLEANER INLET
4. FILL WITH ENGINE COOLANT
5. START ENGINE AND CHECK FOR ENGINE COOLANT LEAKS