Resistance/Operation Inspection
1. REMOVE V-BANK COVER2. REMOVE INTAKE AIR CONNECTOR PIPE
3. INSPECT INJECTOR RESISTANCE
a. Disconnect the 8 injector connectors.
b. Using an ohmmeter, measure the resistance between the terminals.
Resistance: 13.4 - 14.2 Ohms at 20 °C (68 °F)
If the resistance is not as specified, replace the injector.
c. Reconnect the 8 injector connectors.
4. REINSTALL INTAKE AIR CONNECTOR PIPE
5. REINSTALL V-BANK COVER