Level Control Solenoid Valve: Service and Repair

REMOVAL
1. FRONT: REMOVE FRONT RIGHT WHEEL AND FENDER LINER
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
2. REAR: REMOVE LUGGAGE COMPARTMENT TRIM FRONT COVER
3. REMOVE HEIGHT CONTROL VALVE

HINT: At the time of installation, after installation, check for air leakage. Refer to Electronic Level Control; Testing and Inspection.

a. Remove the connector.
b. Remove the air tube.
1. Remove the holder.
2. Spread the clip and pull the air tube out straight and slowly.

NOTICE: Do not get scratches or foreign particles on the O-ring, O-ring seal and flare section.

HINT: At the time of installation, please refer to the following items.
^ If replacing O-ring, coat it with MP grease.
^ Push the air tube in straight to correct it until the clip makes "click" sound.

3. Remove the clip.
c. Remove the 2 nuts and the height control valve.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
4. REMOVE BUSHING, CUSHION AND SPACER


INSTALLATION
Installation is in the reverse order of removal.