Displaying & Reading Trouble Codes

NOTE: This is the only information provided by the manufacturer for reading diagnostic trouble codes for this system.

PRE-CHECK




1. DTC CHECK (Using LEXUS hand-held tester)

a. Prepare the LEXUS hand-held tester.
b. Connect the tester to DLC3.
c. Turn the ignition switch ON and the LEXUS hand-held tester main switch ON.
d. Use the LEXUS hand-held tester to check the DTCs and note them down. (For operational instructions, see the LEXUS hand-held tester's instruction book).
e. See Rear Left Door Control System Diagnostic Trouble Code Chart,to confirm the details of DLC3.

2. DTC CLEARANCE
DTC will be cleared when the defective condition is recovered normally.