Trunk / Liftgate Shock / Support: Service and Repair

LUGGAGE COMPARTMENT DOOR SUPPORT

REPLACEMENT

1. REMOVE LUGGAGE COMPARTMENT DOOR SUPPORT




2. IF NECESSARY, REPLACE LUGGAGE COMPARTMENT DOOR SUPPORT

NOTE: Handling the support.

- Do not disassemble the support as the cylinder is filled with pressurized gas.
- If the support is to be replaced, drill a 2.0 - 3.0 mm (0.079 - 0.118 in.) hole in the area shown in the illustration to completely release the high pressure gas before disposing of it.
- When drilling, chips may fly out so work carefully.
- The gas is colorless, odorless and non-toxic.
- When working, handle the support carefully. Never score or scratch the exposed part of the piston rod, and allow any paint or oil to get on it.
- Do not turn the piston rod and cylinder with the support fully extended.

3. INSTALL LUGGAGE COMPARTMENT DOOR SUPPORT