Canada - Interior - Interior Squeak and Rattle Noise Tips

Bulletin
0426

Issue Date
2001-03-05

Market
Canada

Reference
BC-01-002

Model
LS430

Year Range
2001

Component
BC

Subject:
SQUEAK AND RATTLE NOISE TIPS

The following repair procedures have been developed to help eliminate potential squeak and rattle noises from the shifter bezel and moonroof areas.

APPLICABLE VEHICLES: 2001 model year LS430 vehicles.







PART INFORMATION:

REPAIR PROCEDURES:







1. To eliminate a rattle noise caused by movement of the shift lever bezel, add felt as shown in the illustration.

Remove the shifter bezel by simply using a nylon removing tool or flat-head screwdriver with tape over the tip to prevent scratching.

Add felt length as indicated:
Length: 10 mm
Width: 14 mm
Thickness: 0.3 mm







2. To eliminate a rattle noise caused by movement on the moonroof apply grease as shown in the illustration. Also remove existing felt and replace with a thicker piece. (Length: 9 mm; Width: 18 mm; Thickness: 1-2 mm).

NOTE: Confirm that jam protection does not malfunction after applying a thicker piece of felt.







REPAIR TIME:


NOTE:
Issue of this Technical Service Bulletin is to ensure that proper repair information is available. IT DOES NOT CONSTITUTE AN AUTHORIZATION FOR REPAIR. Normal provisions of the formal warranty policy, as applicable, will apply.