Body No. 4 Control System

NOTE: This is the only information provided by the manufacturer for reading diagnostic trouble codes for this system.

PRE-CHECK




1. DTC CHECK (Using LEXUS hand-held tester)
a. Prepare the LEXUS hand-held tester.
b. Connect the LEXUS hand-held to DLC3.
c. Turn the ignition switch ON and the LEXUS hard-held tester main switch ON.
d. Use the LEXUS hand-held tester to check the DTCs, note them down. (For opening instructions, see the LEXUS hand-held tester's instruction book).
e. See Diagnostic Trouble Code to confirm the details of the DLC3.

2. DTC CLEARANCE
DTC will be cleared when the trouble output to DTC is recovered normally.