Without Scan Tool

Clear the DTC

In case of not using hand-held tester:
Clear DTC.




1. Using SST, connect the terminals Tc and CG of the DLC3.

SST 09843-18040

2. Turn the ignition switch ON.
3. Clear DTC stored in ECU by depressing the brake pedal 8 or more times within 5 sec.
4. Check that the ABS warning light shows the normal code.
5. Remove the SST from the DLC3.

SST 09843-18040

HINT: Disconnecting the battery cable during repairs will not erase the DTC in the ECU.