Suspension Control Module: Service and Repair

REPLACEMENT
1. REMOVE FRONT DOOR SCUFF PLATE LH
2. REMOVE INSTRUMENT PANEL SUB-ASSY UPPER
3. REMOVE INSTRUMENT PANEL INSERT SUB-ASSY LOWER LH





4. REMOVE ABSORBER CONTROL ECU
a. Disconnect the 2 absorber control ECU connectors.
b. Remove the 2 nuts and absorber control ECU.
5. INSTALL ABSORBER CONTROL ECU
a. Install the absorber control ECU with the 2 nuts.
Torque: 7.8 Nm (80 kgf-cm, 69 inch lbs.)
b. Connect the 2 absorber control ECU connectors.