Steering Angle Sensor: Service and Repair

REPLACEMENT
1. PRECAUTION
2. SEPARATE BATTERY NEGATIVE TERMINAL
3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
4. REMOVE HORN BUTTON ASSEMBLY
5. REMOVE STEERING WHEEL ASSEMBLY
6. REMOVE STEERING COLUMN LOWER COVER
7. REMOVE SPIRAL CABLE SUB-ASSEMBLY
8. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
9. REMOVE STEERING SENSOR
10. INSTALL STEERING SENSOR
11. INSPECT SPIRAL CABLE SUB-ASSEMBLY
a. If the following condition is identified, replace the spiral cable sub-assembly with new one.
Condition:
Scratches or cracks on the connector
Cracks, dents or chipping of the spiral cable sub-assembly
12. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
13. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
14. INSTALL SPIRAL CABLE SUB-ASSEMBLY
15. INSTALL STEERING COLUMN LOWER COVER
16. CENTER SPIRAL CABLE
17. INSTALL STEERING WHEEL ASSEMBLY
18. INSPECT STEERING WHEEL CENTER POINT
19. INSTALL HORN BUTTON ASSEMBLY
20. INSPECT SRS WARNING LIGHT