Manual Shifting Test

MANUAL SHIFTING TEST

HINT:
- With this test, it can be determined whether the trouble occurs in the electrical circuit or is a mechanical problem in the transaxle.
- If any abnormalities are found in the following test, the problem is in the transaxle itself.




a. Disconnect 2 connectors of transmission wire.




b. Drive with the transmission wire disconnected. Shifting the shift lever in the order of L, 2, 3, 4 and D to check whether the shifting condition changes the table below.

HINT: When driving with the transmission wire disconnected, the shift lever position is in L or 2, the gear position is held in 3rd and the shift lever position is in 3, 4 or D, the gear position is held in 4th. However, the shift position is in R or P, the operation is same as usual.

c. Connect 2 connectors of transmission wire.
d. Clear the DTC.