Inner Rear View Mirror Assy

INNER REAR VIEW MIRROR ASSEMBLY

REPLACEMENT

HINT:
- The installation procedures are the removal procedures in reverse order.
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
- A bolt without a torque specification is shown in the standard bolt chart.




1. REMOVE MAP LAMP ASSEMBLY
a. w/o LEXUS link system:
Open the upper console.
b. Using a screwdriver, pry out the lens cover.

HINT: Tape the screwdriver tip before use.




c. Using a screwdriver, pry out the 2 caps.

HINT: Tape the screwdriver tip before use.

d. Remove the 4 screws.
e. Remove the map lamp and disconnect the connector.




2. REMOVE INNER REAR VIEW MIRROR ASSEMBLY
a. Remove the 2 screws and mirror.
b. Disconnect the connector.