System Description

System Diagram:

DESCRIPTION

1. GENERAL

a. The air conditioning system has the following features:
- In compliance with the temperature set at the temperature control switch, the neural network control calculates the outlet temperature based on the input signals from various sensors. In addition, corrections in accordance with the signals from the evaporative temperature sensor and the water temperature sensor are added to control the outlet air temperature.
- Controls the front and rear blower motors in accordance with the airflow volume that has been calculated by the neural network control based on the input signals from various sensors.
- Automatically switches the outlets in accordance with the outlet mode ratio that has been calculated by the neural network control based on the input signals from various sensors.
- Automatically controls the air inlet control damper in accordance with the airflow volume that has been calculated by the neural network control.
- Turns the compressor on/off and controls the discharge capacity based on the signals from various sensors.
- Based on the signals from the ambient temperature sensor, this control calculates the outside temperature, which is then corrected in the air conditioner ECU, and shown in the multi-information display in the combination meter.
- Switched the rear defogger and outside rear view mirror heaters on for 15 minutes when the rear defogger switch is switched on. Switched them off if the switch is pressed while they are operating.
- Controls the orientation and the angle of the front center register based on the input signals from various sensors and on the outlet mode.
- Determines whether the clean air filter (for the front A/C) is clogged by monitoring the air inlets, and airflow volume.
- The A/C amplifier automatically controls the air inlets based on the signals from the smog ventilation sensor.
- Improves the air quality by linking the air inlet control damper and the blower motor (for the rear A/C and air purifier), based on the signals from the exhaust gas sensor and the smoke sensor.
- Checks the sensors in accordance with operation of the air conditioner switches.

Front Air Conditioning:

Rear Air Conditioning And Air Purifier:

2. MODEL POSITION AND DAMPER OPERATION

3. AIR OUTLETS AND AIR VOLUME RATIONS