System Description

System Diagram:

SYSTEM DIAGRAM




GATEWAY




CAN




BEAN (Instrument Panel)




BEAN (Door)




BEAN (Column)




AVC LAN

SYSTEM DESCRIPTION

1. METER GAUGE AND WARNING/INDICATOR




GAUGE




WARNING/INDICATOR

2. MULTI-INFORMATION DISPLAY







- The multi-information display consists of three display areas (computer area, graphic area, and warning area) and the master warning indicator. These areas display the contents given in the table.
- A steering pad switch (for multi-information display) that switches the contents of the multi-information display has been provided on the steering wheel.




3. MULTI-INFORMATION DISPLAY FLOW CHART

Part 1:

Part 2:

a. Warning area
- Warning process:
- The warning items can be scrolled automatically. (Unable to switch manually)
- When any malfunction in the framed items (-) is detected, a warning buzzer (a single sound) sounds. It sounds only when the malfunction occurs for the first time. The item is displayed along with the buzzer sounding.
- The most current warning item is displayed first.
- When two or more warning occur, they are displayed in turn at an interval of 2 seconds. When a warnings occurs, the item is displayed for 6 seconds only the first time.

- Smart Key System:
- The buzzer in the smart key system is controlled by a signal from the security ECU.

HINT: The buzzer sounds continuously if the item "Shift to P range" is displayed.

- Oil Maintenance Display:
- The items are displayed in accordance with the distance after reset.

b. Computer area
- The items from "Range Over * * * / Range Approx * * *" to "BLANK" can be changed with the DISP1 (switch) of the steering pad switch.

c. Graphic area
- Open Door Display:
- The display is shown when any of the doors are opens.

HINT: If the warning item other than the door warning is detected at the same time, the master warning comes on/ blinks in accordance to direction from the displayed item in the warning area.

- Park Sonar Display:
- Refer to "How to Proceed With Troubleshooting" for details on the park sonar display.
- The display blinks when the clearance is the closest.

- Others:
- The items "COMPASS", "OUTSIDE TEMPERATURE" and "BLANK" can be changed with the DISP2 (switch) of the steering pad switch.
- While +B is connected, the mode that was on when the ignition switch was turned off the last time is displayed.
- When the display is changed from radar cruise, it is displayed for only 6 seconds and then returns to the radar cruise display.
- While the radar cruise is on, "RADAR CRUISE READY" is displayed in the warning area if the park sonar and door open displays are in the graphic area.

- Radar Cruise Display:
- Refer to "How to Proceed With Troubleshooting" for details on the radar cruise display.
- The radar cruise set display is interrupted for only 6 seconds while the park sonar and/or open door (displays) are on.
- The display brinks when warning the driver that the distance with other vehicles is getting to be too close. This warning has priority over all.