Removal and Installation of Fuel Control Parts

REMOVAL AND INSTALLATION OF FUEL CONTROL PARTS

a. PLACE FOR REMOVING AND INSTALLING OF FUEL SYSTEM PARTS
1. Work in a place with good air ventilation that does not have welders, grinders, drills, electric motors, stoves, or any other ignition sources.
2. Never work in a pit or near a pit as vaporized fuel will collect in those places.

b. REMOVING AND INSTALLING OF FUEL SYSTEM PARTS
1. Prepare a fire extinguisher before starting operation.
2. To prevent static electricity, install a ground on the fuel changer, vehicle and fuel tank, and do not spray the area with water. The work surface will become slippery. Do not clean up spills with water as this will spread gasoline and create a fire hazard.
3. Avoid using electric motors, working lamps and other electric equipment that can cause sparks or high temperatures.
4. Avoid using iron hammers as they may create sparks.
5. Dispose of fuel-contaminated shop rags separately using a fire resistant container.