Front Speed Sensor

FRONT SPEED SENSOR (for 4WD)

Components:

REMOVAL

HINT:
^ Use the same procedures for the RH side and LH side.
^ The procedures listed below are for the LH side.

1. REMOVE FRONT WHEEL
2. REMOVE SPEED SENSOR FRONT LH
a. Disconnect the speed sensor front LH connector.





b. Remove the bolt and speed sensor front LH.

NOTICE: Prevent foreign matter from attaching to the sensor tip.

INSPECTION
1. INSPECT SPEED SENSOR FRONT
a. Inspect the front speed sensor. If any of the following occurs, replace the speed sensor front with a new one:
^ The surface of the speed sensor front is cracked, dented, or chipped off.
^ The connector or wire harness is scratched, cracked, or damaged.
^ The speed sensor front has been dropped.

INSTALLATION





1. INSTALL SPEED SENSOR FRONT LH
a. Install the speed sensor front LH with the bolt.

NOTICE: Prevent foreign matter from attaching to the sensor tip.

b. Connect the speed sensor front LH connector.

2. INSTALL FRONT WHEEL
3. INSPECT SPEED SENSOR SIGNAL