Brake Warning Light Circuit (Remains on)
Brake Warning Light Remains ONDESCRIPTION
The skid control ECU is connected to the combination meter via CAN If any of the following is detected, the BRAKE warning light remains on:
- The skid control ECU connector is disconnected from the skid control
- The brake fluid level is insufficient.
- The parking brake is applied.
- EBD operation is not possible.
Wiring Diagram:
INSPECTION PROCEDURE
NOTE: When replacing the brake actuator assembly, perform zero point calibration. Programming and Relearning
Step 1-2:
Step 4-5:
Step 6-7:
Step 8:
Step 9-10:
Step 10(Continued):
