Instrument Panel, Gauges and Warning Indicators: Description and Operation

System Diagram (Part 1):

System Diagram (Part 2):

System Diagram (Part 3):

SYSTEM DIAGRAM

SYSTEM DESCRIPTION

Part 1:

Part 2:

1. METER GAUGE

HINT:
- The multi-information display has been located in the center of the combination meter assembly.
- The display shows a message or animation for each of the functions described in the table.

Part 1:

Part 2:

Part 3:

Part 4:

2. MULTI-INFORMATION DISPLAY







3. DIAGNOSIS SYSTEM

HINT:
- Diagnosis information can be displayed on the multiinformation display after connecting a jumper wire between TC and CG of the DLC3.
- The multi-information display shows "DIAG VSC" before meter CPU receives the diagnosis information signal from the skid control ECU.
- The multi-information display shows "DIAG VSC 23" when meter CPU receives the diagnosis information signal from the skid control ECU.
- The multi-information display shows "DIAG VSC OK" when meter CPU receives the no diagnosis information signal from the skid control ECU.