Low Pitched Horn

Low Pitched Horn:

LOW PITCHED HORN

REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL
2. REMOVE FRONT BUMPER ASSEMBLY

3. REMOVE LOW PITCHED HORN ASSEMBLY




a. Disconnect the connector.
b. Remove the bolt and the low pitched horn assembly.

INSTALLATION

1. INSTALL LOW PITCHED HORN ASSEMBLY




a. Install the low pitched horn assembly with the bolt.

Torque: 20 N.m (204 kgf.cm, 15 ft.lbf)

b. Connect the connector.

2. INSTALL FRONT BUMPER ASSEMBLY
3. INSTALL COOL AIR INTAKE DUCT SEAL
4. VEHICLE PREPARATION FOR FOG LIGHT AIM ADJUSTMENT
5. PREPARATION FOR FOG LIGHT AIMING
6. FOG LIGHT AIMING INSPECTION
7. FOG LIGHT AIMING ADJUSTMENT