Powertrain Management: Technical Service Bulletins

• Recalls
  • Recall 09V020000: Fuel Rail Replacement
  • Recall - Fuel Rail Replacement
    • Dealer Letter
    • Q & A
    • Owner Letter
    • Technical Instructions For 2006-2007 GS300/350
      • Information For 2006-2007 GS300/350
      • I. Operation Flow Chart For 2006-2007 GS300/350
      • II. Identification of Affected Vehicles For 2006-2007 GS300/350
      • III. Preparation For 2006-2007 GS300/350
      • IV. Work Procedure Table of Contents For 2006-2007 GS300/350
      • V. Background For 2006-2007 GS300/350
      • VI. Work Procedure Safety Precautions For 2006-2007 GS300/350
      • VII. Fuel Delivery Pipe Replacement For 2006-2007 GS300/350
        • A. Remove the Engine Covers and Discharge the Fuel System For GS300/350
        • B. Remove the Intake Manifold For 2006-2007 GS300/350
        • C. Remove Fuel Delivery Pipe For 2006-2007 GS300/350
        • D. Remove and Inspect Fuel Injectors For 2006-2007 GS300/350
        • E. Fuel Pipe Installation For 2006-2007 GS300/350
        • F. GS350 2GR-FSE Intake Manifold Reinstallation For 2006-2007 GS300/350
        • G. GS300 3GR-FSE Intake Manifold Reinstallation For 2006-2007 GS300/350
        • H. Check For Fuel Leaks & Reassembly For 2006-2007 GS300/350
      • VIII. Appendix For 2006-2007 GS300/350
    • Technical Instructions For 2006-2007 IS250/350
      • Information For 2006-2007 IS250/350
      • Operation Flow Chart For 2006-2007 IS250/350
      • I. Identification of Affected Vehicles
      • II. Preparation For 2006-2007 IS250/350
      • III. Work Procedure Table of Contents For 2006-2007 IS250/350
      • IV. Background For 2006-2007 IS250/350
      • V. Work Procedure Safety Precautions For 2006-2007 IS250/350
      • VI. Fuel Delivery Pipe Replacement For 2006-2007 IS250/350
        • A. Remove the Engine Covers and Discharge the Fuel System For 2006-2007 IS250/350
        • B. Remove the Intake Manifold For 2006-2007 IS250/350
        • C. Remove Fuel Delivery Pipe
        • D. Remove and Inspect Fuel Injectors
        • E. Fuel Pipe Installation
        • F. Check For Fuel Leaks & Reassembly For 2006-2007 IS250/350
      • VII. Appendix For 2006-2007 IS250/350
    • Technical Instructions For 2007-2008 LS460/LS460L
      • Information For 2007-2008 LS460/LS460L
      • I. Operation Flow Chart For 2007-2008 LS460/LS460L
      • II. Identification of Affected Vehicles For 2007-2008 LS460/LS460L
      • III. Preparation For 2007-2008 LS460/LS460L
      • IV. Table of Contents For 2007-2008 LS460/LS460L
      • V. Background For 2007-2008 LS460/LS460L
      • VI. Work Procedure Safety Precautions For 2007-2008 LS460/LS460L
      • VII. Fuel Delivery Pipe Replacement For 2007-2008 LS460/LS460L
        • A. Remove the Engine Covers and Discharge the Fuel System
        • B. Remove Fuel Delivery Pipe With Fuel Injector
        • C. Replace Fuel Delivery Pipe
        • D. Install Fuel Delivery Pipe With Fuel Injector
        • E. Reinstall the Intake Manifold & Check For Fuel Leaks & Reassembly
      • VIII. Appendix For 2007-2008 LS460/LS460L
• Customer Interest
  • Canada - Engine/Engine Controls - Engine Idle Knock Noise
  • Canada - Engine Control - Hesitation On Acceleration/DTCP2119
  • Canada - A/T Controls - Hesitation/Bump Accelerating From Stop
  • Canada - A/T - Brake Hold System Not Releasing upon Accel.
  • Engine Controls - Hesitation On Acceleration/DTC P2119
  • A/T Controls - Brake Hold System Won't Release
  • Engine Controls - Engine Knock at Idle
• By Symptom
  • Customer Interest
    • Canada - Engine/Engine Controls - Engine Idle Knock Noise
    • Canada - Engine Control - Hesitation On Acceleration/DTCP2119
    • Canada - A/T Controls - Hesitation/Bump Accelerating From Stop
    • Canada - A/T - Brake Hold System Not Releasing upon Accel.
    • Engine Controls - Hesitation On Acceleration/DTC P2119
    • A/T Controls - Brake Hold System Won't Release
    • Engine Controls - Engine Knock at Idle
  • Driveability
    • Engine Controls - Hesitation On Acceleration/DTC P2119
  • Erratic Shifting
    • A/T - Hesitation Or Bump Upon Acceleration
  • Noise
    • Engine Controls - Engine Knock at Idle
  • Odors
    • Canada - Exhuast - Sulfur Odor/Smell From Exhaust
  • Recalls
    • Recall 09V020000: Fuel Rail Replacement
    • Recall - Fuel Rail Replacement
      • Dealer Letter
      • Q & A
      • Owner Letter
      • Technical Instructions For 2006-2007 GS300/350
        • Information For 2006-2007 GS300/350
        • I. Operation Flow Chart For 2006-2007 GS300/350
        • II. Identification of Affected Vehicles For 2006-2007 GS300/350
        • III. Preparation For 2006-2007 GS300/350
        • IV. Work Procedure Table of Contents For 2006-2007 GS300/350
        • V. Background For 2006-2007 GS300/350
        • VI. Work Procedure Safety Precautions For 2006-2007 GS300/350
        • VII. Fuel Delivery Pipe Replacement For 2006-2007 GS300/350
          • A. Remove the Engine Covers and Discharge the Fuel System For GS300/350
          • B. Remove the Intake Manifold For 2006-2007 GS300/350
          • C. Remove Fuel Delivery Pipe For 2006-2007 GS300/350
          • D. Remove and Inspect Fuel Injectors For 2006-2007 GS300/350
          • E. Fuel Pipe Installation For 2006-2007 GS300/350
          • F. GS350 2GR-FSE Intake Manifold Reinstallation For 2006-2007 GS300/350
          • G. GS300 3GR-FSE Intake Manifold Reinstallation For 2006-2007 GS300/350
          • H. Check For Fuel Leaks & Reassembly For 2006-2007 GS300/350
        • VIII. Appendix For 2006-2007 GS300/350
      • Technical Instructions For 2006-2007 IS250/350
        • Information For 2006-2007 IS250/350
        • Operation Flow Chart For 2006-2007 IS250/350
        • I. Identification of Affected Vehicles
        • II. Preparation For 2006-2007 IS250/350
        • III. Work Procedure Table of Contents For 2006-2007 IS250/350
        • IV. Background For 2006-2007 IS250/350
        • V. Work Procedure Safety Precautions For 2006-2007 IS250/350
        • VI. Fuel Delivery Pipe Replacement For 2006-2007 IS250/350
          • A. Remove the Engine Covers and Discharge the Fuel System For 2006-2007 IS250/350
          • B. Remove the Intake Manifold For 2006-2007 IS250/350
          • C. Remove Fuel Delivery Pipe
          • D. Remove and Inspect Fuel Injectors
          • E. Fuel Pipe Installation
          • F. Check For Fuel Leaks & Reassembly For 2006-2007 IS250/350
        • VII. Appendix For 2006-2007 IS250/350
      • Technical Instructions For 2007-2008 LS460/LS460L
        • Information For 2007-2008 LS460/LS460L
        • I. Operation Flow Chart For 2007-2008 LS460/LS460L
        • II. Identification of Affected Vehicles For 2007-2008 LS460/LS460L
        • III. Preparation For 2007-2008 LS460/LS460L
        • IV. Table of Contents For 2007-2008 LS460/LS460L
        • V. Background For 2007-2008 LS460/LS460L
        • VI. Work Procedure Safety Precautions For 2007-2008 LS460/LS460L
        • VII. Fuel Delivery Pipe Replacement For 2007-2008 LS460/LS460L
          • A. Remove the Engine Covers and Discharge the Fuel System
          • B. Remove Fuel Delivery Pipe With Fuel Injector
          • C. Replace Fuel Delivery Pipe
          • D. Install Fuel Delivery Pipe With Fuel Injector
          • E. Reinstall the Intake Manifold & Check For Fuel Leaks & Reassembly
        • VIII. Appendix For 2007-2008 LS460/LS460L
  • Won't Release
    • Canada - A/T - Brake Hold System Not Releasing upon Accel.
• All Technical Service Bulletins
  • Vehicle - Flood Damage Inspection And Handling
  • Canada - Engine Controls - Accelerator Pedal Sensor Precaution
  • Canada - Engine/Engine Controls - Engine Idle Knock Noise
  • Canada - Engine Control - Hesitation On Acceleration/DTCP2119
  • Canada - A/T Controls - Hesitation/Bump Accelerating From Stop
  • Canada - A/T - Brake Hold System Not Releasing upon Accel.
  • Canada - Engine Control - ECM Reflash Procedure
  • Canada - Engine Control - TDT Lexus diagnostic Tester
  • Canada - Engine Control - Failure Initialize CAN Interface
  • Canada - Engine Control - ECM Reprogramming Process
  • Canada - Engine Control - Oxygen Sensor Location Identification
  • Engine Controls - Accelerator Pedal Sensor Service Precautions
  • Canada - Exhuast - Sulfur Odor/Smell From Exhaust
  • Canada - Engine Control - Software And Calibration Files TDT
  • Engine Controls - Techstream(R) ECU Re-Flash Procedure
  • Engine Controls - A/F And O2 Sensor Identification
  • Engine Controls - Hesitation On Acceleration/DTC P2119
  • A/T Controls - Brake Hold System Won't Release
  • Engine Controls - Engine Knock at Idle
  • Engine Controls - Bank 1/Bank 2 O2 Sensor Identification
  • A/T - Hesitation Or Bump Upon Acceleration
  • Recall 09V020000: Fuel Rail Replacement
  • Recall - Fuel Rail Replacement
    • Dealer Letter
    • Q & A
    • Owner Letter
    • Technical Instructions For 2006-2007 GS300/350
      • Information For 2006-2007 GS300/350
      • I. Operation Flow Chart For 2006-2007 GS300/350
      • II. Identification of Affected Vehicles For 2006-2007 GS300/350
      • III. Preparation For 2006-2007 GS300/350
      • IV. Work Procedure Table of Contents For 2006-2007 GS300/350
      • V. Background For 2006-2007 GS300/350
      • VI. Work Procedure Safety Precautions For 2006-2007 GS300/350
      • VII. Fuel Delivery Pipe Replacement For 2006-2007 GS300/350
        • A. Remove the Engine Covers and Discharge the Fuel System For GS300/350
        • B. Remove the Intake Manifold For 2006-2007 GS300/350
        • C. Remove Fuel Delivery Pipe For 2006-2007 GS300/350
        • D. Remove and Inspect Fuel Injectors For 2006-2007 GS300/350
        • E. Fuel Pipe Installation For 2006-2007 GS300/350
        • F. GS350 2GR-FSE Intake Manifold Reinstallation For 2006-2007 GS300/350
        • G. GS300 3GR-FSE Intake Manifold Reinstallation For 2006-2007 GS300/350
        • H. Check For Fuel Leaks & Reassembly For 2006-2007 GS300/350
      • VIII. Appendix For 2006-2007 GS300/350
    • Technical Instructions For 2006-2007 IS250/350
      • Information For 2006-2007 IS250/350
      • Operation Flow Chart For 2006-2007 IS250/350
      • I. Identification of Affected Vehicles
      • II. Preparation For 2006-2007 IS250/350
      • III. Work Procedure Table of Contents For 2006-2007 IS250/350
      • IV. Background For 2006-2007 IS250/350
      • V. Work Procedure Safety Precautions For 2006-2007 IS250/350
      • VI. Fuel Delivery Pipe Replacement For 2006-2007 IS250/350
        • A. Remove the Engine Covers and Discharge the Fuel System For 2006-2007 IS250/350
        • B. Remove the Intake Manifold For 2006-2007 IS250/350
        • C. Remove Fuel Delivery Pipe
        • D. Remove and Inspect Fuel Injectors
        • E. Fuel Pipe Installation
        • F. Check For Fuel Leaks & Reassembly For 2006-2007 IS250/350
      • VII. Appendix For 2006-2007 IS250/350
    • Technical Instructions For 2007-2008 LS460/LS460L
      • Information For 2007-2008 LS460/LS460L
      • I. Operation Flow Chart For 2007-2008 LS460/LS460L
      • II. Identification of Affected Vehicles For 2007-2008 LS460/LS460L
      • III. Preparation For 2007-2008 LS460/LS460L
      • IV. Table of Contents For 2007-2008 LS460/LS460L
      • V. Background For 2007-2008 LS460/LS460L
      • VI. Work Procedure Safety Precautions For 2007-2008 LS460/LS460L
      • VII. Fuel Delivery Pipe Replacement For 2007-2008 LS460/LS460L
        • A. Remove the Engine Covers and Discharge the Fuel System
        • B. Remove Fuel Delivery Pipe With Fuel Injector
        • C. Replace Fuel Delivery Pipe
        • D. Install Fuel Delivery Pipe With Fuel Injector
        • E. Reinstall the Intake Manifold & Check For Fuel Leaks & Reassembly
      • VIII. Appendix For 2007-2008 LS460/LS460L
  • Canada - Vehicle - Flood Damage Inspection