Removal

2GR-FE ENGINE CONTROL SYSTEM: ACCELERATION SENSOR:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE ENGINE UNDER COVER LH
3. REMOVE ENGINE UNDER COVER RH
4. REMOVE COOL AIR INTAKE DUCT SEAL Removal

5. REMOVE ENGINE ROOM SIDE COVER LH Removal

6. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

7. REMOVE AIR CLEANER INLET ASSEMBLY Removal

8. REMOVE NO. 1 AIR CLEANER INLET Removal

9. REMOVE ACCELERATION SENSOR






(a) Disconnect the acceleration sensor connector and clamp.






(b) Remove the 2 nuts and acceleration sensor.