Reading and Clearing Diagnostic Trouble Codes

METER / GAUGE SYSTEM:

DTC CHECK / CLEAR

1. CHECK DTC
(a) Connect Techstream to the DLC3.
(b) Engine switch on (IG) and turn the tester on.
(c) Enter the following menus: Body Electrical / Trouble Codes.
(d) Check for DTCs.
2. CLEAR DTC
(a) Connect Techstream to the DLC3.
(b) Engine switch on (IG) and turn the tester on.
(c) Enter the following menus: Body Electrical / Trouble Codes.
(d) Erase DTCs by pressing the YES button on the tester.