Installation

METER: COMBINATION METER: INSTALLATION

INSTALLATION

1. INSTALL COMBINATION METER GLASS





(a) Attach the 7 claws to install the glass.






(b) Install the combination meter glass's wire harness with the clamps.






(c) Connect the 3 connectors.






(d) Close the cover and attach the 2 claws.






2. INSTALL COMBINATION METER ASSEMBLY
(a) Connect the connector.
(b) Install the combination meter with the 4 screws.






3. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
(a) Connect the connector.
(b) Attach the 5 clips to install the cluster finish panel.
4. INSTALL STEERING COLUMN COVER UPPER Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

7. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.