Enhancement Of Product Appeal

Enhancement of Product Appeal

Parts With Low Repair Costs





^ By adopting a front crash box construction, impact can be absorbed in the event of a minor collision, reducing the need for front side member repairs.





^ By adopting a rear crash box construction, impact can be absorbed in the event of a minor collision, reducing the need for rear floor side member repairs.

Wiper Arm and Blade





A unified construction is used for the wiper blade and arm. A fin-shaped resin cover is adopted for the entire wiper blade. This ensures the effectiveness of the wipers even when traveling at high speeds.

Child Restraint System





CRS (Child Restraint System) lower anchorage for securing child seats are provided behind the seat cushion of the rear seat.

^ Two CRS anchor brackets for securing a child seat are provided above the package tray trim.

Luggage Compartment Door Handle Inside





In case a person is inadvertently locked inside the trunk and needs to get out, a luggage compartment door handle inside is included inside the luggage room.

^ The handle is made of phosphorescent plastic, so that it is visible in the luggage room for a while even after the luggage room door has been closed.

Seat Belt

1. General





The following types of seat belts are provided.

2. Pretensioner and Force Limiter





In accordance with deployment signal from the center airbag sensor assembly, the seat belt pretensioner activates simultaneously with the deployment of SRS airbag for frontal collision.

In the beginning of the collision if the tension of the seat belt applied to the occupant reaches a predetermined level, the force limiter activates to control the force.

3. Seat Belt Comfort Guide





Seat belt comfort guides for children or small occupants are located on the both sides of the rear seats. With this device, the belt guide can be slid to a position to reduce discomfort caused by the seat belt.