Installation

2UR-GSE ENGINE CONTROL: MASS AIR FLOW METER: INSTALLATION

2UR-GSE ENGINE CONTROL: MASS AIR FLOW METER: INSTALLATION

1. INSTALL MASS AIR FLOW METER






(a) Install the MAF meter with the 2 screws.
Torque: 1.0 Nm (10 kgf-cm, 9 in-lbf)
NOTICE: Make sure that the O-ring is not pinched.

(b) Connect the MAF meter connector.
2. INSTALL ENGINE ROOM SIDE COVER RH Installation

3. INSTALL COOL AIR INTAKE DUCT SEAL Installation

4. INSTALL V-BANK COVER SUB-ASSEMBLY Installation