Removal

2UR-GSE ENGINE CONTROL: ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL

2UR-GSE ENGINE CONTROL: ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL

1. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

2. REMOVE COOL AIR INTAKE DUCT SEAL Removal

3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

4. REMOVE ENGINE UNDER COVER
5. DRAIN ENGINE COOLANT Service and Repair

6. REMOVE E.F.I. ENGINE COOLANT TEMPERATURE SENSOR






(a) Disconnect the E.F.I. engine coolant temperature sensor connector.
(b) Remove the E.F.I. engine coolant temperature sensor.
(c) Remove the gasket from the engine coolant temperature sensor.