Removal

2UR-GSE STARTING: ENGINE SWITCH: REMOVAL

2UR-GSE STARTING: ENGINE SWITCH: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

3. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH Removal

4. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH Removal

5. REMOVE CONSOLE PANEL SUB-ASSEMBLY Removal

6. REMOVE FRONT ASH RECEPTACLE ASSEMBLY Removal

7. REMOVE REAR ASH RECEPTACLE ASSEMBLY Removal

8. REMOVE CONSOLE BOX REGISTER ASSEMBLY Removal

9. REMOVE CONSOLE BOX Removal

10. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Removal

11. REMOVE CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL Removal

12. REMOVE MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System) Removal

13. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System) Removal

14. REMOVE ENGINE SWITCH






(a) Disconnect the switch connector.
(b) Detach the 2 claws and remove the switch.