Removal

2UR-GSE ENGINE CONTROL: INTEGRATION RELAY: REMOVAL

2UR-GSE ENGINE CONTROL: INTEGRATION RELAY: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE NO. 2 RELAY BLOCK COVER
3. REMOVE INTEGRATION RELAY






(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and pull up the integration relay.
(b) Disconnect the 3 connectors.