Installation

PRE-COLLISION: SEAT BELT CONTROL ECU: INSTALLATION

PRE-COLLISION: SEAT BELT CONTROL ECU: INSTALLATION

1. INSTALL SEAT BELT CONTROL ECU (w/o Intuitive Parking Assist System)






(a) Temporarily install nut A.
(b) Insert nut A into the hole on the vehicle body (left side of the luggage compartment).
(c) Slide down the seat belt control ECU to temporarily install it.
(d) Insert the 2 bolts into the holes on the vehicle body and fully tighten the 3 nuts in the order of B, A, and C.
Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)
(e) Connect the connector.
2. INSTALL SEAT BELT CONTROL ECU (w/ Intuitive Parking Assist System)






(a) Install the clearance warning ECU to the seat belt control ECU with the 2 nuts.
Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)
(b) Temporarily install nut A.






(c) Insert temporarily tightened nut A into the hole on the vehicle body (left side of the luggage compartment).
(d) Slide down the seat belt control ECU and the clearance warning ECU as a unit to temporarily install them.
(e) Insert the 2 bolts into the holes on the vehicle body and fully tighten the 3 nuts in the order of B, A, and C.
Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)
(f) Connect the connectors.
3. INSTALL SIDE LUGGAGE COMPARTMENT TRIM COVER LH Installation

4. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK Installation

5. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER Installation

6. INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM HOOK Installation

7. INSTALL ROPE HOOK Installation

8. INSTALL NO. 2 ROOM LIGHT ASSEMBLY Installation

9. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER Installation

10. INSTALL ROPE HOOK ASSEMBLY Installation

11. INSTALL DECK SIDE TRIM BOX RH
12. INSTALL DECK SIDE TRIM BOX LH
13. INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM COVER