Instrument Panel, Gauges and Warning Indicators: Description and Operation

METER: METER / GAUGE SYSTEM:

SYSTEM DIAGRAM





INPUT AND OUTPUT SIGNALS OF THE COMBINATION METER ASSEMBLY:













*1: with Seat Position Memory System
*2: with Intuitive Parking Assist System
*3: for U.S.A.
*4: for Canada
*5: with Dynamic Radar Cruise Control System
*6: with Pre-collision System
*7: with AFS
*8: with Tire Pressure Warning System


SYSTEM DESCRIPTION

1. METER GAUGE





(a) METER GAUGE






(b) WARNING/INDICATOR





*1: for U.S.A.
*2: for Canada
*3: with Pre-collision System
*4: with Tire Pressure Warning System
*5: with AFS
(c) MULTI-INFORMATION DISPLAY
HINT:
- The multi-information display has been located in the center of the combination meter assembly.
- The display shows a message or animation for each of the functions described in the table below.





*1: for U.S.A.
*2: with Dynamic Radar Cruise Control System
*3: with Intuitive Parking Assist System
2. MULTI-INFORMATION DISPLAY

















3. DIAGNOSIS SYSTEM




HINT:
- Diagnosis information can be displayed on the multi-information display after connecting a jumper wire between TC and CG of the DLC3 Diagnosis System.
- The multi-information display shows "DIAG VSC" before meter CPU receives the diagnosis information signal from the skid control ECU.
- The multi-information display shows "DIAG VSC 23" when the meter CPU receives the diagnosis information signal from the skid control ECU.
- The multi-information display shows "DIAG VSC OK" when the meter CPU receives the no diagnosis information signal from the skid control ECU.