Installation

METER / GAUGE / DISPLAY: COMBINATION METER: INSTALLATION

INSTALLATION

1. INSTALL COMBINATION METER ASSEMBLY





(a) Position the combination meter assembly on the steering column as shown in the illustration.
NOTE:
Do not damage the instrument panel safety pad or combination meter assembly.

(b) Connect the connectors.





(c) Engage the 2 positioning pins of the combination meter assembly.
(d) Engage the 2 claws and install the combination meter assembly.
(e) Remove the protective tape.
2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY Installation
3. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY





(a) Install the 2 clips.





(b) Install the instrument cluster finish panel sub-assembly with the 2 screws.
4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation
5. INSTALL SIDE INSTRUMENT PANEL LH Installation
6. INSTALL FRONT DOOR OPENING TRIM COVER LH Installation
7. INSTALL FRONT DOOR SCUFF PLATE LH Installation
8. INSTALL STEERING COLUMN COVER Installation
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.