Installation

LIGHTING: REAR COMBINATION LIGHT ASSEMBLY: INSTALLATION

HINT
* Use the same procedures for the RH and LH side.
* The procedures listed below are for the LH side.
1. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH





(a) Attach the rear combination light with the 2 pins and install the light guide of the body side.





(b) Connect the connector.

2. INSTALL REAR LIGHT COVER LH

3. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH Reassembly

4. INSTALL REAR FLOOR FINISH SIDE PLATE LH Reassembly

5. INSTALL LUGGAGE COMPARTMENT TRIM COVER FRONT Reassembly

6. INSTALL LUGGAGE COMPARTMENT TRIM COVER INNER LOWER Reassembly

7. INSTALL TONNEAU COVER ASSEMBLY Reassembly

8. INSTALL LUGGAGE COMPARTMENT TRIM REAR COVER SUB-ASSEMBLY Reassembly

9. INSTALL TOOL BOX COVER Reassembly

10. INSTALL SPARE TIRE

11. INSTALL SPARE WHEEL COVER ASSEMBLY

12. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH Reassembly

13. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH Reassembly

14. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

15. INSTALL REAR FLOOR FINISH PLATE Reassembly

16. INSTALL TONNEAU COVER STOPPER SUB-ASSEMBLY LH Reassembly

17. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

18. PERFORM INITIALIZATION

(a) Perform initialization Testing and Inspection.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.