Part 2

NETWORKING: CAN COMMUNICATION SYSTEM: TERMINALS OF ECU

(a) Disconnect the smart key ECU (certification ECU) connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





15. COMBINATION METER

(a) Disconnect the combination meter connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





16. DISPLAY AND NAVIGATION MODULE DISPLAY (NAVIGATION ECU) (w/ Navigation System)





(a) Disconnect the display and navigation module display (navigation ECU) connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





17. HEADLIGHT SWIVEL ECU (AFS ECU) (w/ AFS)

(a) Disconnect the headlight swivel ECU (AFS ECU) connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





18. DRIVING SUPPORT ECU (w/ Dynamic Radar Cruise Control System)





(a) Disconnect the driving support ECU connector.

Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

CAN No. 1 Bus Branch Wire





Standard Resistance:

Driving Support Bus Main Wire





19. SEAT BELT CONTROL ECU (w/ Pre-collision System)





(a) Disconnect the seat belt control ECU connectors.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





20. POWER STEERING ECU





(a) Disconnect the power steering ECU connectors.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





21. SPIRAL CABLE WITH SENSOR (STEERING ANGLE SENSOR)

(a) Disconnect the spiral cable with sensor (steering angle sensor) connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





22. YAW RATE SENSOR

(a) Disconnect the yaw rate sensor connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





23. PARKING ASSIST ECU (w/ Wide View Front Monitor System)





(a) Disconnect the parking assist ECU connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





24. CLEARANCE WARNING ECU (w/ Intuitive Parking Assist System

(a) Disconnect the clearance warning ECU connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





25. AIR CONDITIONING AMPLIFIER





(a) Disconnect the air conditioning amplifier connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





26. TIRE PRESSURE MONITOR ECU

(a) Disconnect the tire pressure monitor ECU connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





27. FRONT POWER SEAT SWITCH LH (w/ Seat Position Memory)





(a) Disconnect the connectors of the front power seat switch LH.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





28. MULTIPLEX TILT AND TELESCOPIC ECU (w/ Seat Position Memory)

(a) Disconnect the multiplex tilt and telescopic ECU connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





29. OUTER MIRROR CONTROL ECU LH (w/ Seat Position Memory)





(a) Disconnect the outer mirror control ECU LH connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





30. OUTER MIRROR CONTROL ECU RH (w/ Seat Position Memory )





(a) Disconnect the outer mirror control ECU RH connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





31. MILLIMETER WAVE RADAR SENSOR (w/ Dynamic Radar Cruise Control System)

(a) Disconnect the millimeter wave radar sensor connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





32. LANE RECOGNITION CAMERA SENSOR (w/ Lane-keeping Assist System)





(a) Disconnect the lane recognition camera sensor connector.

Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





33. DRIVER MONITOR ECU (w/ Driver Monitor System)

(a) Disconnect the driver monitor ECU connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance: