Windshield Washer Spray Nozzle: Adjustments

WIPER AND WASHER: WASHER NOZZLE: ADJUSTMENT

1. ADJUST WASHER NOZZLE SUB-ASSEMBLY

(a) Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.





NOTICE:
Be careful not to damage the windshield.

HINT
Tape the screwdriver tip before use.

(b) Disconnect the washer nozzle sub-assembly from the washer hose.





NOTICE:
Washer nozzles cannot be reused.

(c) Select a washer nozzle sub-assembly so that the washer fluid spray area is within the standard.





(d) Connect the selected washer nozzle sub-assembly to the washer hose.

(e) Engage the 2 claws and install the washer nozzle sub-assembly.