Test K: The Defrost System Will Not Shut Off Automatically
PINPOINT TEST K: THE DEFROST SYSTEM WILL NOT SHUT OFF AUTOMATICALLYNormal Operation
The heated backlight relay, which is integral to the smart junction box (SJB), receives power from circuit SBB06 (BN/RD). When the rear window defrost switch is pressed on the HVAC module - dual automatic temperature control (DATC), a message is sent to the SJB through circuit CH122 (WH/OG). Once the SJB receives the message to turn on the rear window defrost, the SJB grounds the heated backlight relay coil, which sends power through the antenna module to the rear window defrost grid through circuit CLS38 (VT/WH).
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Antenna module
- Inoperative SJB
K1-K2:
