100000 MI or 160000 KM

Inspect
    Wheels
      Inspect the wheels and related components for abnormal noise, wear, looseness or drag.
    Vehicle
      Perform multi-point inspection (recommended).
    Universal Joint, Drive/Propeller Shaft
      Inspect and lubricate steering linkage, suspension, drive shaft, and U-joints if equipped with grease fittings.
    Tie Rod End
      Inspect and lubricate tie-rod ends if equipped with grease fittings.
    Fluid - A/T
      Inspect automatic transmission fluid level (if equipped with a dipstick).
    Exhaust System
      Inspect exhaust system and heat shields.
    Cooling System
      Inspect engine cooling system for strength, and hoses.
    Constant Velocity Joint Boot
      Inspect half-shaft boots (if equipped).
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake linings, hoses and parking brake.
    Ball Joint
      Inspect and lubricate ball joints if equipped with grease fittings.
Replace
    Spark Plug
      Replace spark plugs.
    Oil Filter, Engine
      Change engine oil and filter.
    Engine Oil
      Change engine oil and filter.
    Drive Belt
      Replace accessory drive belt(s). Perform a follow-up inspection at 120,000 miles (192,000 km).
    Coolant
      Change engine coolant. Initial replacement at 100,000 miles (160,000 km) or 72 months; every 50,000 miles (80,000 km) or 36 months thereafter.
    Cabin Air Filter / Purifier
      Replace cabin air filter (if equipped).
Rotate
    Tires
      Rotate tires, inspect tire wear and measure tread depth.