10000 MI or 16000 KM

Inspect
    Wheels
      Inspect the wheels and related components for abnormal noise, wear, looseness or drag.
    Vehicle
      Perform multi-point inspection (recommended) if not using Special Operating conditions.
    Universal Joint, Drive/Propeller Shaft
      Inspect and lubricate steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints if equipped with grease fittings if not using Special Operating conditions.
    Tie Rod End
      Inspect and lubricate tie-rod ends if not using Special Operating conditions.
    Steering and Suspension
      Inspect and lubricate steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints if equipped with grease fittings if not using Special Operating conditions.
    Fluid - A/T
      Inspect automatic transmission fluid level (if equipped with a dipstick) if not using Special Operating conditions.
    Exhaust System
      Inspect wxhaust system and heat shields if not using Special Operating conditions.
    Cooling System
      Inspect engine cooling system for strength, and hoses if not using Special Operating conditions.
    Constant Velocity Joint Boot
      Inspect half-shaft boots (if equipped) if not using Special Operating conditions.
    Cabin Air Filter / Purifier
      Inspect cabin air filter (if equipped) if not using Special Operating conditions.
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake linings, hoses and parking brake if not using Special Operating conditions.
    Ball Joint
      Inspect and lubricate ball joints if equipped with grease fittings.
Replace
    Oil Filter, Engine
      Change engine oil and filter if not using Special Operating conditions. Change engine oil and replace oil filter if using Special Operating conditions.
    Engine Oil
      Change engine oil and filter if not using Special Operating conditions. Change engine oil and replace oil filter if using Special Operating conditions.
Rotate
    Tires
      Rotate tires, inspect tire wear and measure tread depth if not using Special Operating conditions. Rotate tires, inspect tires for wear and measure tread depth if using Special Operating conditions.