Driver/Vehicle Information Display: Testing and Inspection
INFORMATION DISPLAY INSPECTION1. Remove the meter hood.
2. Connect the information display connector and A/C amplifier connectors.
3. Measure the voltage at the information display terminals as indicated.
- If not specified, inspect the parts listed under "Inspection area" and the related wiring harnesses.
- If the parts and wiring harnesses are okay but the system still does not work properly, replace the information display.
Terminal Voltage Table (Reference) - Connector View:
Terminal Voltage Table (Reference) - Pinouts (A - T):
NOTE: Voltage at terminals G, I, K, and M cannot be measured because they are used for serial communication. To inspect terminals G, I, K, and M.