Removal and Installation

INSTRUMENT CLUSTER REMOVAL/INSTALLATION

1. Perform the instrument cluster configuration when replacing it.
2. Disconnect the negative battery cable.
3. Remove the following parts:
1. Front scuff plate (Driver's side)
2. Front side trim (Driver's side)
3. Hood release lever (See HOOD LATCH REMOVAL/INSTALLATION.)
4. Lower panel
5. Meter hood







4. Remove the screw.
5. Remove the instrument cluster.
6. Disconnect the connector.
7. Install in the reverse order of removal.
8. When replacing the instrument cluster of vehicles with the immobilizer system, perform the following procedure:
- IMMOBILIZER SYSTEM COMPONENT REPLACEMENT/KEY ADDITION AND CLEARING.

CAUTION: The removed instrument cluster should be placed with the display side up to prevent grease from leaking from the meters.