Recall 09V126000: Engine Wiring Harness Modification

VEHICLE MAKE/MODEL: MODEL YEAR(S):

Mazda/Mazda3 2010

MANUFACTURER: Mazda Motor Corp.

MFR'S REPORT DATE: April 15, 2009

NHTSA CAMPAIGN ID NUMBER: 09V126000

NHTSA ACTION NUMBER: N/A

COMPONENT: Electrical System

POTENTIAL NUMBER OF UNITS AFFECTED: 25400

SUMMARY:
Mazda is recalling 25,400 M/Y 2010 Mazda3 vehicles. The clearance between the engine harness and the housing of starter motor may be insufficient. Due to this, the covering of the harness may be damaged through vibration during operation possibly causing a short-circuit between certain harness wires and the starter housing. A short-circuit can result in engine control malfunction and/or poor shift quality.

CONSEQUENCE:
The main fuse may blow out causing the engine to stall and inability of restart, increasing the risk of a crash.

REMEDY:
Dealers will have the engine harness inspect and add a protector clip on the affected section of the harness. If necessary, the harness will be repaired. This service will be performed free of charge. The recall is expected to begin on May 6, 2009. Owners may contact Mazda at 1-800-222-5500.

NOTES:
Mazda recall No. 5409D. Owners may also contact The National Highway Traffic Safety Administration's Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to http://www.safercar.gov.