Instruments - Displaying Vehicle Voltage Instructions
Date: December 19, 2007Order No.: T-B-54.30/88a
Supersedes: T-B-54.30/88 dated June 10, 2003
Group: 54
Revision History
Revision Date Purpose
a 12/19/07 Applicable Models and Instructions Updated
- 06/10/03 Initial issue
SUBJECT:
Model 164.122/172/175/177/186/822/871/886
Model 251.122/156/165/175/177
Model 463.246/249/271
Display of Vehicle Electrical Network Voltage in the Instrument Cluster
In the above models, electrical network voltage may be displayed through the instrument cluster's multi-function display.
For model 463 up to MY07 with SA code XY6
1. Using the steering wheel mounted multifunction buttons, ensure that the vehicle's main odometer is displayed within the instrument cluster's multifunction display.
2. Turn key to position one in the electronic ignition switch
3. Within 1.5 seconds of turning to position one, press the instrument cluster's reset button three times
4. An audible sound will be heard and the vehicle voltage will appear in multifunction display
For model 164, 251 or 463 as of MY07 with SA code XY7
1. Using the steering wheel mounted multifunction buttons, ensure that the vehicle's main odometer is displayed within the instrument cluster's multifunction display.
2. Turn key to position one in the electronic ignition switch
3. Press the reset button on the instrument cluster three times
4. An audible sound will be heard and the vehicle voltage will appear in multifunction display
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on December 19, 2007. Please refer to Netstar --> Star TekInfo --> Star Time for the most current labor time allowance.
In Case of Warranty, use the table.