120A00

The limit value of component M16/6 (Throttle valve actuator) is exceeded due to offset drift.


Possible cause:

- M16/6 (Throttle valve actuator)
Affected functions:

- Power generation

-------------------------------------------------

Test 1: Learning of the throttle valve stop

Test 2: Check component M16/6 (Throttle valve actuator).

1. Learning of the throttle valve stop
Learning of the throttle valve stop
Conditions for learning process

- Ignition ON
- Engine not running
- Accelerator pedal must not be operated.
- Vehicle speed 0 km/h
Do you want to perform the function 'Program'?

YES
Warning!Communication with ECU required.


NO

1. No further information available.


2. Check component M16/6 (Throttle valve actuator).
Important note:If fault codes are present for the following components, these fault codes must first be processed

- B5/1 (Boost pressure sensor)
- B17/8 (Charge air temperature sensor)
Then repeat test step.Communication with ECU required