145F00

The negative control deviation during throttle valve control is too high.


Possible cause:

- M16/6 (Throttle valve actuator)
Affected functions:

- Power generation

-------------------------------------------------

Test 1: Check component M16/6 (Throttle valve actuator).

Test 2: Check component M16/6 (Throttle valve actuator) for unobstructed movement.

1. Check component M16/6 (Throttle valve actuator).
Important note:If fault codes are present for the following components, these fault codes must first be processed

- B5/1 (Boost pressure sensor)
- B17/8 (Charge air temperature sensor)
Then repeat test step.Communication with ECU required

2. Check component M16/6 (Throttle valve actuator) for unobstructed movement.
Figure legend

- M16/6 (Throttle valve actuator)
- B5/1 (Boost pressure sensor)
Possible cause and remedy

- Expose component M16/6 (Throttle valve actuator).
- Check component M16/6 (Throttle valve actuator) for unobstructed movement.
End of test