Manufacturer Code Charts: 154000

Control module has an internal error.


Possible cause:

- N3/9 (CDI control unit)
Affected functions:

- Power generation

-------------------------------------------------

Test 1: Internal control module error

1. Internal control module error
Possible cause and remedy

- If fault codes are present in control module N3/9 (CDI control unit), process these first of all.
- Inspect all control units for undervoltage faults.
- Erase fault memory in control unit N3/9 (CDI control unit)
- Switch off ignition.
- Await runon time.
- Turn on ignition.
- Reread fault memory of control unit N3/9 (CDI control unit).
If fault occurs once again, replace control unit N3/9 (CDI control unit).End of test