Manufacturer Code Charts: 172100

The internal combustion engine was stalled by a malfunction in the automatic engine start/stop system.


Possible cause:

- Test signal cable 'Automatic engine start/stop'.
Affected functions:

- Power generation

-------------------------------------------------

Test 1: Test signal cable 'Automatic engine start/stop'.

1. Test signal cable 'Automatic engine start/stop'.
Possible cause and remedy

- Inspect cable and plug connections between control modules N3/9 (CDI control unit) and N10/1 (Front SAM control unit with fuse and relay module) for loose contact, damage and corrosion, repair or replace if necessary.
- Continue diagnosis in control module N10/1 (Front SAM control unit with fuse and relay module).
End of test