Cylinder Head Assembly: Tools and Equipment

Special tools
Pressure-testing plate 617 589 01 25 00

Suspension fixture 115 589 34 63 00

Socket 27 mm, 1/2" drive 001 589 65 09 O0
to crank engine

Screwdriver socket 10 mm, 000 589 05 07 00
1/2" drive, 140 mm long
for hexagon socket cylinder head bolts

Screwdriver socket, 1/2" drive, 617 589 00 10 00
140 mm long for twelve-point
socket cylinder head bolts

Screwdriver with tommy bar for hexagon 116 589 03 07 00
socket bolts M8, 6 mm, 440 mm long

Impact extractor for bearing pin 116 589 20 33 00
(basic unit)

Threaded stud M 6, 50 mm long
(for impact extractor) 116 589 01 34 00

Threaded stud M 6, 150 mm long
for impact extractor 116 589 02 34 00

Threaded stud M 8, 150 mm long 616 589 00 34 00
for impact extractor

Extractor for tension rail bearing pin 115 589 20 33 00
(basic unit)

Threaded stud M 6, 30 mm long 115 589 01 34 00
for extractor

Threaded stud M 8, 30 mm long 115 589 00 34 00
for extractor

Valve adjusting wrench 14 mm (two) 615 589 00 01 00

Holding wrench for valve spring retainer 615 589 00 03 00

Torque wrench handle 40 - 200 Nm 001 589 67 21 00
signal-transmitting with removable
ratchet 1/2" square

Commercially available tool
Electrically heated water tank e.g. Messrs. Otto Durr, D-7123 Sachsenheim-Ochsenbach