Rear Seat (Non-Power), Remove/Install

Removal





1 Push both locking levers on rear seat cushion in outward direction, lift off rear seat cushion at the front and remove in upward direction.





2 Pull rear seat backrest out of holders on rear wall in upward direction.





3 Remove screw on intermediate padding above center arm backrest.





4 Pull intermediate padding out of holders (arrows) in upward direction.

Note: The intermediate padding can be removed and installed in the same manner also without removing rear seats.





5 Unscrew center armrest and remove.

Note: Both rear seats must be removed to remove center armrest.

Installation





6 Fasten intermediate padding and screw down.

7 Install center armest.

8 Attach rear seat backrest to rear wall!

9 Slip rear seat cushion under rear seat backrest, and engage in locking pins (arrows}.