Computers and Control Systems: Technical Service Bulletins

• Customer Interest
  • Cruise Control Inoperative
• By Symptom
  • Customer Interest
    • Cruise Control Inoperative
  • Driveability
    • Engine Hesitates, Cuts Out, Hard Start
    • Engine Cuts-Out, Cannot Be Restarted
    • On-Off Ratio Won't Adjust After Repair, MIL on
    • Engine Surges at Idle at Operating Temp.
  • Erratic Operation
    • Engine - Cuts Out When Stopping/Intermittent Idle Surge
  • False instrument warning light/gauges
    • Control Module - (CIS-E) False Code 16
  • Inoperative
    • Cruise Control Inoperative
    • Scan Tool (Impulse Counter ) - Failure, Improper Hook-Up
  • Odors
    • Control Unit - CIS-E, On/Off Ratio Test/Impulse Readout
  • Poor performance
    • Engine Hesitates, Cuts Out, Hard Start
  • Starting problems
    • Engine Hesitates, Cuts Out, Hard Start
    • Engine Cuts-Out, Cannot Be Restarted
    • Engine Does Not Start
• All Technical Service Bulletins
  • Engine Control - Engine Control Module (N3/10) Flashing
  • Cruise Control Inoperative
  • Hand-Held Tester (HHT) - Updated Modules
  • Policy - HHT Warranty & Precautions
  • Scan Tool (Impulse Counter ) - Failure, Improper Hook-Up
  • EGR Valve - Testing
  • Control Unit - CIS-E, On/Off Ratio Test/Impulse Readout
  • Policy - Fluke Meter Approved
  • Battery Discharged/Electronic Damage - After Jump Start
  • Engine Hesitates, Cuts Out, Hard Start
  • Control Module - (CIS-E) False Code 16
  • O2 Sensors - Avoiding Bogus Test Results
  • Engine Cuts-Out, Cannot Be Restarted
  • On-Off Ratio Won't Adjust After Repair, MIL on
  • Engine Does Not Start
  • Engine Surges in Idle at Operating Temperature
  • Engine - Cuts Out When Stopping/Intermittent Idle Surge
  • Engine Surges at Idle at Operating Temp.