Work Instructions

Group: 88

Number: 248

Date: March 1990

SUBJECT:
MODEL R129 FRONT LICENSE PLATE BRACKET

1. Hold license plate bracket in position by inserting both hooks into the top slot in bumper and push against the top edge. Slide bracket from side to side to find center location while pushing against the top edge.

2. Drill two 3.5 mm diameter holes in the bumper using the two top, outer holes in the bracket as a guide. The hole depth needs to be only 13 mm.

3. Remove the bracket and with a 10 mm drill bit, drill a counter-sink for ease in installing the screws provided.

4. Reinstall the bracket inserting both hooks first and then install both screws.