Work Instructions

Group: 88

Number: 248a

Date: March 1992

SUBJECT:
MODELS 129 AND 140 FRONT LICENSE PLATE BRACKET

INSTALLING FRONT LICENSE PLATE BRACKET

1. Hold license plate bracket in position by inserting both hooks into the top slot in bumper and push against the top edge. Slide bracket from side to side to find center location while pushing against the top edge.

2. Drill two 3.5 mm diameter holes in the bumper using the two top, outer holes in the bracket as a guide. The hole depth need only be 13 mm.

3. Ensure that both hooks are inserted and then install both screws.